Langshao’s Pillar Set 13
This is my 4U or more wider roads’ default pillar
Please give thumb up QwQ,I want green stars
Langshao’s Pillar：
1-2 高速2车道x2，下方可放置一条8车道并且不会影响网格
3-4 高速3/4车道x2
5-6 高速3/4车道x2，中间可架设地铁（12m）
7-8 高速3/4车道x2【桥墩要比3-4更直】
9-12：预留
13：双向宽路专用
桥墩原型：上海中环（南环）
必须mod：network skins
求点赞求点赞求点赞！
注意：1.匝道处不适合用3-4号共用桥墩（若高于12m5-6号也不适合，若要用的话用对向桥墩做成弯拱门式桥墩）
2.1-2号桥墩不太适合在弯道处使用（反着用做成拱门除外）
3.共用桥墩在比较小的弯道处使用时没什么大问题的
1 Side Highway 2 cell
2 Side Highway 2 cell Flipped
3 Side Highway 3/4 cell
4 Side Highway 3/4 cell Flipped
5 Side Highway 3/4 cell with elevated metro（metro-12m）
6 Side Highway 3/4 cell with elevated metro（metro-12m） Flipped
7 Side Highway 3/4 cell（more straight than 3-4）
8 Side Highway 3/4 cell Flipped（more straight than 3-4）
9-12：？？？
13：Pillar 3,4 double way version
Hey buddy,are you complains about the car hit the pillar?are you complains other’s side pillar can’t add lights on it?now there’re some new pillars for you,it has lights on the pillar and it doesn’t effect car on the road.
*Network skins is required*
*Move it is recommended*
PLEASE RATE IT IF YOU LIKE~~
Warning:
1.Some intersection and ramps are not suitable for 3/4 pillars（you can use flipped pillars to make a “archway”）,if the roads are above 12m, 5/6 are not suitable too.
2.Please check it out your folder,if it doesn’t have”Pillar.xml”,please add it（or you can’t see the pillar at network skin)
【set a new empty “.txt” file in the folder,set the name to”Pillar.xml”】
请注意检查订阅后是否会有Pillar.xml ，若没有请自行添加（新建txt空白文档直接改名）【否则network skin无法读取
MY twitter:
Loading...
